Basis Info
- Modell Nr.: 20*20*3-200*200*24mm
- Legierung : Nichtlegiertem
- Technik : Warmgewalzte
- Art : Ungleich
- Standard : GB , ASTM , JIS
Zusätzliche Informationen..
- Trademark: Honory
- Packing: Generally in Bundle
- Standard: 20*20*3-200x200*24mm
- Origin: China
- HS Code: 7228709000
- Production Capacity: 2000 Metric Tonnes/Day
Produktbeschreibung
Hauptträger des stahl-H des Träger-/I/Kanal-Stahl/Winkel-Stahl Vom weltberühmten Stahlprodukt-Ursprung Tangshan ChinaWinkel-StahlBeschreibung des ProduktesProdukt: gleicher und ungleicher WinkelStandard: GB, JIS, ENGrad: Gleicher Winkel: GB9787-88, Q235B, GB/T 1591-94, Q345B, Q420B, Q460 G3101, SS400, SS540, EN10025 S235JR/S355JRUngleicher Winkel: GB9787-88, Q235B, G3101, SS400Anlieferung: 15-35 Tage, nachdem Ablagerung oder L/C empfangen worden sindMarkt: Koreaner, The Middle East, Afrika, Europa, Amerika,Verpackung: Im Allgemeinen im Bündel oder als den Anträgen der KlientenAnwendunga.-) Träger, Brücken, Lieferung; b.-) Übertragungsaufsatz, Reaktionsaufsatz; c.-) anhebende Transportmaschinerie; d.-) Industrieofen; e.-) Behälterrahmen, Lagerwarenregale, etc. Größe der GB-gleichen Winkel
Größe (mm) | Theoretisches Gewicht(kg/m) | Winkel | Größe (mm) | Theoretisches Gewicht(kg/m) | ||||
Winkel | B | d | B | d | ||||
2 | 20 | 3 | 0.889 | 9 | 90 | 6 | 8.350 | |
4 | 1.145 | 7 | 9.656 | |||||
2.5 | 25 | 3 | 1.124 | 8 | 10.946 | |||
4 | 1.459 | 10 | 13.476 | |||||
3.0 | 30 | 3 | 1.373 | 12 | 15.940 | |||
4 | 1.786 | 10 | 100 | 6 | 9.366 | |||
3.6 | 6 | 3 | 1.656 | 7 | 10.830 | |||
4 | 2.163 | 8 | 12.276 | |||||
5 | 2.654 | 10 | 15.120 | |||||
4 | 40 | 3 | 1.852 | 12 | 17.898 | |||
4 | 2.422 | 14 | 20.611 | |||||
5 | 2.976 | 11 | 110 | 7 | 11.928 | |||
4.5 | 45 | 3 | 2.088 | 8 | 13.532 | |||
4 | 2.736 | 10 | 16.690 | |||||
5 | 3.369 | 12 | 19.782 | |||||
6 | 3.985 | 14 | 22.809 | |||||
5 | 50 | 3 | 2.332 | 12.5 | 125 | 8 | 15.504 | |
4 | 3.059 | 10 | 19.133 | |||||
5 | 3.770 | 12 | 22.696 | |||||
6 | 4.465 | 14 | 26.193 | |||||
5.6 | 56 | 3 | 2.624 | 14 | 140 | 10 | 21.488 | |
4 | 3.446 | 12 | 25.522 | |||||
5 | 4.251 | 14 | 29.490 | |||||
8 | 6.568 | 16 | 33.393 | |||||
6.3 | 63 | 4 | 3.907 | 16 | 160 | 10 | 24.729 | |
5 | 4.822 | 12 | 29.391 | |||||
6 | 5.721 | 14 | 33.987 | |||||
8 | 7.469 | 16 | 38.518 | |||||
7 | 70 | 4 | 4.372 | 18 | 180 | 12 | 33.159 | |
5 | 5.397 | 14 | 38.383 | |||||
6 | 6.406 | 16 | 43.542 | |||||
7 | 7.398 | 18 | 48.634 | |||||
8 | 8.373 | 20 | 200 | 14 | 42.894 | |||
7.5 | 75 | 5 | 5.818 | 16 | 48.680 | |||
6 | 6.905 | 18 | 54.401 | |||||
7 | 7.976 | 2 | 60.056 | |||||
8 | 9.030 | 24 | 71.168 | |||||
10 | 11.089 | |||||||
8 | 80 | 5 | 6.211 | |||||
6 | 7.376 | |||||||
78 | 8.5259.658 | |||||||
10 | 11.874 | |||||||
Chemischer Aufbau der GB-Winkel
Grad | Grad | C(%) | Mangan(%) | Si | P | S | V(%) | Notiz: (%) | Ti(%) |
≤(%) | |||||||||
Q195 | - | 0.06-0.12 | 0.25-0.50 | 0.30 | 0.050 | 0.045 | - | - | - |
Q215 | A | 0.09-0.15 | 0.25-0.55 | 0.30 | 0.050 | 0.045 | - | - | - |
B | 0.045 | - | - | - | |||||
Q235 | A | 0.14-0.22 | 0.30-0.65 | 0.30 | 0.050 | 0.045 | - | - | - |
B | 0.12-0.20 | 0.30-0.70 | 0.045 | - | - | - | |||
Q345 | A | ≤0.20 | 1.00-1.60 | 0.55 | 0.045 | 0.045 | 0.02- 0.15 | 0.015- 0.060 | 0.02- 0.20 |
B | 0.040 | 0.040 | |||||||
Mechanische Eigenschaften der GB-Winkel
Grad | Ertrag-Stärke | Dehnfestigkeit(Mpa) | Dehnung | Prüfung 180°Cold-BendDurchmesser r-PinEinStärke | Charpy SpitzkerbeSchlagversuch(Longitudinal) | ||||
Stärke(mm) | σS≥(Mpa) | Stärke(mm) | δ≥(%) | Longitudinal | Quer | TemperaturºC | AKV/J ≥ | ||
Q195 | ≤16 | 195 | 315-430 | ≤16 | 33 | 0 | 0.5a | - | - |
>16-40 | 185 | >16-40 | 32 | ||||||
>40-60 | - | >40-60 | -- | ||||||
>60-100 | - | >60-100 | -- | ||||||
>100-150 | - | >100-150 | -- | ||||||
>150 | - | >150 | -- | ||||||
Q215 | ≤16 | 215 | 330-450 | ≤16 | 31 | 0.5a | a | 20 | 27 |
>16-40 | 205 | >16-40 | 30 | ||||||
>40-60 | 195 | >40-60 | 29 | ||||||
>60-100 | 185 | >60-100 | 28 | 1.5a | 2a | ||||
>100-150 | 175 | >100-150 | 27 | 2a | 2.5a | ||||
>150 | 165 | >150 | 26 | ||||||
Q235 | ≤16 | 235 | 375-500 | ≤16 | 26 | a | 1.5a | 20 | 27 |
>16-40 | 225 | >16-40 | 25 | ||||||
>40-60 | 215 | >40-60 | 24 | 0 | |||||
>60-100 | 205 | >60-100 | 23 | 2a | 2.5a | ||||
>100-150 | 195 | >100-150 | 22 | 2.5a | 3a | - 20 | |||
>150 | 185 | >150 | 21 | ||||||
Q345 | ≤16 | 345 | 470-630 | 21 | - | - | 20 | 34 | |
>16-35 | 325 | ||||||||
>35-50 | 295 | ||||||||
>50-100 | 275 | ||||||||
Größe JIS der gleichen Winkel
Quergröße (mm) | Geräten-Gewicht (kg/m) | Quergröße (mm) | Geräten-Gewicht (kg/m) | |||
AXB | t | AXB | t | |||
20X20 | 3 | 0.885 | 80X80 | 6 | 7.32 | |
25X25 | 3 | 1.12 | 80X80 | 7 | 8.48 | |
30X30 | 3 | 1.36 | 80X80 | 8 | 9.55 | |
30X30 | 4 | 1.78 | 90X90 | 6 | 8.25 | |
30X30 | 5 | 2.16 | 90X90 | 7 | 9.59 | |
38X38 | 3 | 1.72 | 90X90 | 8 | 10.9 | |
38X38 | 4 | 2.26 | 90X90 | 9 | 12.2 | |
40X40 | 3 | 1.83 | 90X90 | 10 | 13.3 | |
40X40 | 4 | 2.41 | 100X100 | 6 | 9.22 | |
40X40 | 5 | 2.95 | 100X100 | 7 | 10.7 | |
50X50 | 3 | 2.33 | 100X100 | 8 | 12.1 | |
50X50 | 4 | 3.06 | 100X100 | 10 | 14.9 | |
50X50 | 5 | 3.77 | 120X120 | 8 | 14.7 | |
50X50 | 6 | 4.43 | 120X120 | 10 | 18.2 | |
60X60 | 5 | 4.55 | 120X120 | 12 | 21.5 | |
60X60 | 6 | 5.41 | 130X130 | 9 | 17.9 | |
65X65 | 5 | 5 | 130X130 | 10 | 19.7 | |
65X65 | 6 | 5.91 | 130X130 | 12 | 23.4 | |
65X65 | 8 | 7.66 | 150X150 | 10 | 22.9 | |
70X70 | 5 | 5.37 | 150X150 | 12 | 27.3 | |
70X70 | 6 | 6.38 | 150X150 | 15 | 33.6 | |
70X70 | 7 | 7.35 | 200X200 | 15 | 45.3 | |
75X75 | 5 | 5.76 | 200X200 | 20 | 59.7 | |
75X75 | 6 | 6.85 | 200X200 | 24 | 71.1 | |
75X75 | 7 | 7.94 | 250X250 | 25 | 93.7 | |
75X75 | 8 | 8.92 | 250X250 | 28 | 104 | |
75X75 | 9 | 9.96 | 250X250 | 35 | 128 | |
Chemischer Aufbau von JIS
Grad | Stärke (mm) | C (%) | Si (%) | Mangan (%) | P (%) | S (%) |
SS330 | -- | -- | -- | -- | ≤0.050 | ≤0.050 |
SS400 | -- | -- | -- | -- | ≤0.050 | ≤0.050 |
SM490A | ≤50 | ≤0.20 | ≤0.55 | ≤1.60 | ≤0.035 | ≤0.035 |
>50-200 | ≤0.22 | ≤0.55 | ≤1.60 | ≤0.035 | ≤0.035 | |
SM490B | ≤50 | ≤0.18 | ≤0.55 | ≤1.60 | ≤0.035 | ≤0.035 |
>50-200 | ≤0.20 | ≤0.55 | ≤1.60 | ≤0.035 | ≤0.035 |
Mechanische Eigenschaften von JIS
Grad | Ertrag-Stärke | Dehnfestigkeit(Mpa) | Dehnung | Prüfung 180°Cold-BendR-Innerhalb des RadiusEinStärke | AKV/J(0ºC) | ||
Stärke(mm) | σb≥(Mpa) | Stärke(mm) | δ≥(%) | ||||
SS330 | ≤16 | 205 | 330-430 | Platte, Streifen, flache Stäbe | r=0.5a | -- | |
≤5 | 26 | ||||||
>16-≤40 | 195 | 5-16 | 21 | ||||
16-50 | 26 | ||||||
>40 | 28 | ||||||
>40 | 175 | Stäbe, Winkel | r=0.5a | ||||
≤25 | 25 | ||||||
>25 | 30 | ||||||
SS400 | ≤16 | 245 | 400-510 | Platte, Streifen, flache Stäbe | r=1.5a | ||
≤5 | 21 | ||||||
>16-≤40 | 235 | 5-16 | 17 | ||||
16-50 | 21 | ||||||
>40 | 23 | ||||||
>40 | 215 | Stäbe, Winkel | r=1.5a | ||||
≤25 | 25 | ||||||
>25 | 30 | ||||||
SM490A | ≤16 | 325 | 490-610 | ≤5 | 22 | -- | -- |
>16-≤40 | 315 | 5-16 | 17 | ||||
16-50 | 21 | ||||||
>40 | 295 | >40 | 23 | ||||
SM490B | ≤16 | 325 | 490-610 | ≤5 | 22 | -- | ≥27 |
>16-≤40 | 315 | 5-16 | 17 | ||||
16-50 | 21 | ||||||
>40 | 295 | >40 | 23 | ||||
Größe der europäischer Standard-Gleichgestellt-Winkel
BedingungBein length*leg length*thickness (mm) | a | t | r1 | r2 | cm2 | Gewicht (kg/m) |
20*20*3 | 20 | 3 | 3.5 | 2 | 1.1 | 0.882 |
25*25*2 | 25 | 2 | 3.5 | 2 | 1.0 | 0.784 |
25*25*3 | 25 | 3 | 3.5 | 2 | 1.4 | 1.12 |
25*25*4 | 25 | 4 | 3.5 | 2 | 1.9 | 1.45 |
30*30*3 | 30 | 3 | 5 | 2.5 | 1.7 | 1.36 |
30*30*4 | 30 | 4 | 5 | 2.5 | 2.3 | 1.78 |
30*30*5 | 30 | 5 | 5 | 2.5 | 2.8 | 2.18 |
35*35*4 | 35 | 4 | 5 | 2.5 | 2.7 | 2.1 |
35*35*5 | 35 | 5 | 5 | 2.5 | 3.3 | 2.57 |
40*40*4 | 40 | 4 | 6 | 3 | 3.1 | 2.42 |
40*40*5 | 40 | 5 | 6 | 3 | 3.8 | 2.97 |
45*45*4 | 45 | 4 | 7 | 3.5 | 3.5 | 2.74 |
45*45*5 | 45 | 5 | 7 | 3.5 | 4.3 | 3.38 |
45*45*6 | 45 | 6 | 7 | 3.5 | 5.1 | 4 |
50*50*4 | 50 | 4 | 7 | 3.5 | 3.06 | |
50*50*5 | 50 | 5 | 7 | 3.5 | 4.8 | 3.77 |
50*50*6 | 50 | 6 | 7 | 3.5 | 5.7 | 4.47 |
55*55*6 | 55 | 6 | 8 | 4 | 6.3 | 4.95 |
60*60*4 | 60 | 4 | 8 | 4 | 3.72 | |
60*60*5 | 60 | 5 | 8 | 4 | 5.8 | 4.57 |
60*60*6 | 60 | 6 | 8 | 4 | 6.9 | 5.42 |
60*60*8 | 60 | 8 | 8 | 4 | 9.0 | 7.09 |
65*65*7 | 65 | 7 | 9 | 4.5 | 8.7 | 6.83 |
70*70*5 | 70 | 5 | 9 | 4.5 | 5.37 | |
70*70*6 | 70 | 6 | 9 | 4.5 | 8.1 | 6.38 |
70*70*7 | 70 | 7 | 9 | 4.5 | 9.4 | 7.38 |
75*75*4 | 75 | 4 | 9 | 5 | 4.72 | |
75*75*5 | 75 | 5 | 10 | 5 | 5.76 | |
75*75*6 | 75 | 6 | 10 | 5 | 6.85 | |
75*75*7 | 75 | 7 | 10 | 5 | 10.1 | 7.94 |
75*75*8 | 75 | 8 | 10 | 5 | 11.5 | 9.03 |
75*75*10 | 75 | 10 | 10 | 5 | 11.11 | |
80*80*5 | 80 | 5 | 10 | 5 | 6.17 | |
80*80*6 | 80 | 6 | 10 | 5 | 9.4 | 7.34 |
80*80*7 | 80 | 7 | 10 | 5 | 8.49 | |
80*80*8 | 80 | 8 | 10 | 5 | 12.3 | 9.66 |
80*80*10 | 80 | 10 | 10 | 5 | 19.2 | 15.1 |
90*90*6 | 90 | 6 | 11 | 5.5 | 10.6 | 8.3 |
90*90*7 | 90 | 7 | 11 | 5.5 | 12.2 | 9.61 |
90*90*8 | 90 | 8 | 11 | 5.5 | 13.9 | 10.9 |
90*90*9 | 90 | 9 | 11 | 5.5 | 15.5 | 12.2 |
90*90*10 | 90 | 10 | 11 | 5.5 | 17.1 | 13.4 |
90*90*11 | 90 | 11 | 11 | 5.5 | 14.7 | |
100*100*7 | 100 | 7 | 12 | 6 | 10.7 | |
100*100*8 | 100 | 8 | 12 | 6 | 15.5 | 12.2 |
100*100*10 | 100 | 10 | 12 | 6 | 19.2 | 15 |
100*100*12 | 100 | 12 | 12 | 6 | 22.7 | 17.8 |
120*120*8 | 120 | 8 | 13 | 6.5 | 18.7 | 14.7 |
120*120*10 | 120 | 10 | 13 | 6.5 | 23.2 | 18.2 |
120*120*11 | 120 | 11 | 13 | 6.5 | 25.4 | 19.9 |
120*120*12 | 120 | 12 | 13 | 6.5 | 27.5 | 21.6 |
120*120*13 | 120 | 13 | 13 | 6.5 | 23.3 | |
130*130*10 | 130 | 10 | 14 | 7 | 19.8 | |
130*130*12 | 130 | 12 | 14 | 7 | 30.0 | 23.6 |
130*130*13 | 130 | 13 | 14 | 7 | 25.4 | |
130*130*14 | 130 | 14 | 14 | 7 | 27.2 | |
150*150*10 | 150 | 10 | 16 | 8 | 29.3 | 23 |
150*150*12 | 150 | 12 | 16 | 8 | 34.8 | 27.3 |
150*150*14 | 150 | 14 | 16 | 8 | 40.3 | 31.6 |
150*150*15 | 150 | 15 | 16 | 8 | 43.0 | 33.8 |
160*160*14 | 160 | 14 | 17 | 8.5 | 33.9 | |
160*160*16 | 160 | 16 | 17 | 8.5 | 38.4 | |
180*180*14 | 180 | 14 | 18 | 9 | 38.3 | |
180*180*16 | 180 | 16 | 18 | 9 | 55.4 | 43.5 |
180*180*18 | 180 | 18 | 18 | 9 | 61.9 | 48.6 |
200*200*16 | 200 | 16 | 18 | 9 | 61.8 | 48.5 |
200*200*18 | 200 | 18 | 18 | 9 | 69.1 | 54.3 |
200*200*20 | 200 | 20 | 18 | 9 | 76.4 | 59.9 |
200*200*24 | 200 | 24 | 18 | 9 | 90.6 | 71.1 |
Chemischer Aufbau des europäischen Standards
Grad | Thickness/mm | C (%)≤ | Si (%)≤ | Mangan (%)≤ | P (%)≤ | S (%)≤ | Andere (%) |
St37-2 | ≤16>16-25 | 0.170.20 | ---- | 1.401.40 | 0.0450.045 | 0.0450.045 | N≤0.009N≤0.009 |
St52-3 | ≤30>30 | 0.200.22 | 0.550.55 | 1.601.60 | 0.0400.040 | 0.0400.040 | N≤0.009N≤0.009 |
S235JR | ≤16>16-25 | 0.170.20 | ---- | 1.401.40 | 0.0450.045 | 0.0450.045 | N≤0.009N≤0.009 |
S335JR | -- | 0.24 | 0.55 | 1.60 | 0.045 | 0.045 | N≤0.009 |
Mechnical Eigenschaften des europäischen Standards
Grad | Dehnfestigkeit σb/Mpa Thickness/mm | |||
<3 | >3-100 | >100-150 | >150-250 | |
St37-2 | -- | -- | -- | -- |
St52-3 | 510-680 | 490-630 | 470-630 | 450-630 |
S235JR | -- | -- | -- | -- |
S335JR | 510-680 | 490-630 | 470-630 | 450-630 |
Grad | Ertrag-Stärkeσ0.2/Mpa Thickness/mm ≥ | |||||||
≤16 | >16-40 | >40-63 | >63-80 | >80-100 | >100-150 | >150-200 | >200-250 | |
St37-2 | 235 | 235 | -- | -- | -- | -- | -- | -- |
St52-3 | 345 | 335 | 325 | 325 | 315 | 295 | 285 | 275 |
S235JR | 235 | 235 | -- | -- | -- | -- | -- | -- |
S335JR | 345 | 335 | 325 | 325 | 315 | 295 | 285 | 275 |
Grad | Longitudinaloder querPrüfstück | Dehnung für Stärkeδ, ≥(%) | Aufsaugen-in der Bruch Energie für StärkeAKV/J (≥) | ||||||
≥3≤40mm | >40≤63mm | >63≤100mm | >100≤150mm | >150≤250mm | Temperatur prüfen/ºC | >10≤150mm | >150≤250mm | ||
St37-2 | LT | 2624 | 2523 | 2422 | 2222 | 2121 | +20 | 27 | -- |
St52-3 | LT | 2220 | 2119 | 2018 | 1818 | 1717 | +0 | 27 | 23 |
S235JR | LT | 2624 | 2523 | 2422 | 2222 | 2121 | +20 | 27 | -- |
S335JR | LT | 2220 | 2119 | 2018 | 1818 | 1717 | +20 | 27 | 23 |
Größe ASTM der gleichen Winkel
Standardschnitt | Standardschnitt | Gewicht |
Abmessung (Zoll) | Abmessung (mm) | (kg/m) |
L2*2*1/4 | L51*51*6.3 | 4.75 |
L2*2*3/16 | L51*51*4.8 | 3.63 |
L2*2*1/8 | L51*51*3.2 | 2.46 |
L3*3*5/16 | L76*76*7.9 | 9.09 |
L3*3*1/4 | L76*76*6.4 | 7.3 |
L3*3*3/16 | L76*76*4.8 | 5.53 |
L4*4*1/2 | L102*102*12.7 | 19.07 |
L4*4*7/16 | L102*102*11.1 | 16.83 |
L4*4*3/8 | L102*102*9.5 | 14.6 |
L4*4*5/16 | L102*102*7.9 | 12.21 |
L4*4*1/4 | L102*102*6.4 | 9.83 |
L5*5*1/2 | L127*127*12.7 | 24.13 |
L5*5*7/16 | L127*127*11.1 | 21.3 |
L5*5*3/8 | L127*127*9.5 | 18.32 |
L5*5*5/16 | L127*127*7.9 | 15.34 |
L6*6*5/8 | L152*152*15.9 | 36.05 |
L6*6*9/16 | L152*152*14.3 | 32.62 |
L6*6*1/2 | L152*152*12.7 | 29.19 |
L6*6*7/16 | L152*152*11.1 | 25.62 |
L6*6*3/8 | L152*152*9.5 | 22.19 |
L6*6*5/16 | L152*152*7.9 | 18.47 |
Chemischer Aufbau des ASTM Standards
Grad | Stärke/mm | Chemischer Aufbau % | ||||||||||
C≤ | Si | Mangan | P≤ | S≤ | Legierungs-Element | |||||||
Stärke,mm | Typ | |||||||||||
≤10 | >10 | 1 | 2 | 3 | 4 | 5 | ||||||
ASTMA36 | ≤20 | 0.25 | ≤0.40 | -- | 0.04 | 0.05 | -- | -- | -- | -- | -- | |
>20-40 | 0.25 | ≤0.40 | 0.80-1.20 | |||||||||
>40-65 | 0.26 | 0.15-0.40 | 0.80-1.20 | |||||||||
>65-100 | 0.27 | 0.15-0.40 | 0.85-1.20 | |||||||||
>100 | 0.29 | 0.15-0.40 | 0.85-1.20 | |||||||||
ASTMA572GRAD50 | ≤40 | 0.23 | ≤0.40 | 0.50- 1.35 | 0.80- 1.35 | 0.04 | 0.05 | Notiz: : 0.005- 0.05 | V: 0.01- 0.15 | Notiz:: 0.005- 0.05V: 0.01- 0.15Nb+V: 0.02- 0.15 | V: 0.01- 0.15N≤0.015V/N≥4 | Ti: 0.006- 0.04N: 0.003- 0.015V≤0.06 |
>40-100 | 0.15- 0.40 | |||||||||||
Mechanische Eigenschaften des ASTM Standards
Grad | Ertrag-Stärke (Mpa)≥Stärke, mm | DehnfestigkeitMpa | Dehnung (%),≥ | ||
≤200 | >200 | L0=200mm | L0=50mm | ||
ASTM A36 | 250 | 220 | 400-450 | 20 | 23 |
ASTM A572 Gr50 | 345 | ≥450 | 18 | 21 | |
GB-ungleiche Winkel
Größe | Stärke (mm) | Dichte (kg/m) | Größe | Stärke (mm) | Dichte (kg/m) |
25X16 | 3 | 0.912 | 100X63 | 6 | 7.55 |
25X16 | 4 | 1.176 | 100X63 | 7 | 8.722 |
32X20 | 3 | 1.171 | 100X63 | 8 | 9.878 |
32X20 | 4 | 1.522 | 100X63 | 10 | 12.142 |
40X25 | 3 | 1.484 | 100X80 | 6 | 8.35 |
40X25 | 4 | 1.936 | 100X80 | 7 | 9.656 |
45X30 | 3 | 1.687 | 100X80 | 8 | 10.946 |
45X30 | 4 | 2.203 | 100X80 | 10 | 13.476 |
50X32 | 3 | 1.908 | 100X70 | 6 | 8.35 |
50X32 | 4 | 2.494 | 100X70 | 7 | 9.656 |
56X36 | 3 | 2.153 | 100X70 | 8 | 10.946 |
56X36 | 4 | 2.818 | 100X70 | 10 | 13.476 |
56X36 | 5 | 3.466 | 125X80 | 7 | 11.066 |
62X40 | 4 | 3.185 | 125X80 | 8 | 12.551 |
62X40 | 5 | 3.92 | 125X80 | 10 | 15.474 |
62X40 | 6 | 4.638 | 125X80 | 12 | 18.33 |
62X40 | 7 | 5.339 | 140X90 | 8 | 14.16 |
70X45 | 4 | 3.57 | 140X90 | 10 | 17.475 |
70X45 | 5 | 4.403 | 140X90 | 12 | 20.724 |
70X45 | 6 | 5.218 | 140X90 | 14 | 23.908 |
70X45 | 7 | 6.011 | 160X100 | 10 | 19.872 |
75X50 | 5 | 4.808 | 160X110 | 12 | 23.592 |
75X50 | 6 | 5.699 | 160X110 | 14 | 27.247 |
75X50 | 8 | 7.431 | 160X110 | 16 | 30.835 |
75X50 | 10 | 9.098 | 180X110 | 10 | 22.273 |
80X50 | 5 | 5.005 | 180X110 | 12 | 26.464 |
80X50 | 6 | 5.935 | 180X110 | 14 | 30.589 |
80X50 | 7 | 6.848 | 180X110 | 16 | 34.649 |
80X50 | 8 | 7.745 | 200X125 | 12 | 29.761 |
90X56 | 5 | 5.661 | 200X125 | 14 | 34.436 |
90X56 | 6 | 6.717 | 200X125 | 16 | 39.045 |
90X56 | 7 | 7.756 | 200X125 | 18 | 43.588 |
90X56 | 8 | 8.779 |
JIS ungleiche Winkel
Größea * b (mm) | Stärke (mm) | Gewicht (kg/m) | Größea * b (mm) | Stärke (mm) | Gewicht (kg/m) | |
75X50 | 5 | 4.81 | 150 X75 | 9 | 15.4 | |
75X50 | 6 | 5.67 | 150 X75 | 10 | 17 | |
100X50 | 6 | 6.85 | 150 X75 | 12 | 20.2 | |
100X50 | 8 | 8.99 | 150 X75 | 15 | 24.8 | |
100X75 | 6 | 8.04 | 150X90 | 9 | 16.4 | |
100 X75 | 7 | 9.32 | 150X90 | 10 | 18.2 | |
100 X75 | 8 | 10.6 | 150X90 | 12 | 21.6 | |
100 X75 | 9 | 11.8 | 150X90 | 15 | 26.6 | |
100 X75 | 10 | 13 | 150X100 | 9 | 17.1 | |
100 X75 | 12 | 15.4 | 150X100 | 10 | 18.79 | |
125 X75 | 7 | 10.7 | 150X100 | 12 | 22.5 | |
125 X75 | 8 | 12.2 | 150X100 | 15 | 27.7 | |
125 X75 | 9 | 13.6 | 200X100 | 10 | 23 | |
125 X75 | 10 | 15 | 200X100 | 12 | 27.3 | |
125 X75 | 12 | 17.8 | 200X100 | 15 | 33.7 | |
150 X75 | 7 | 12.1 |
ASTM ungleiche Winkel
BedingungenSide*Side*Thickness (Zoll) | Metrische GrößeSide*Side*Thickness (mm) | Theoretisches Gewicht(kg/m) |
L1-3/4×1-1/4×1/8 | 44.5*31.8*3.2 | 1.833 |
L1-3/4×1-1/4×3/16 | 44.5*31.8*4.7 | 2.414 |
L2×1-1/4×3/16 | 51*31.8*4.7 | 2.92 |
L2×1-1/4×1/4 | 51*31.8*6.3 | 3.798 |
L2-1/2×1-1/2×3/16 | 64*38*4.8 | 3.6 |
L2-1/2×1-1/2×1/4 | 64*38*6.4 | 4.8 |
L3×2×3/16 | 76*51*4.8 | 4.6 |
L3×2×1/4 | 76*51*6.4 | 6.1 |
L3×2×5/16 | 76*51*7.9 | 7.4 |
L3×2-1/2×3/16 | L76*64*4.8 | 5.1 |
L3×2-1/2×1/4 | L76*64*6.4 | 6.7 |
L3×2-1/2×5/16 | L76*64*7.9 | 8.3 |
L3×2-1/2×3/8 | L76*64*9.5 | 9.8 |
L3-1/2×2-1/2×1/4 | L89*64*6.4 | 7.3 |
L3-1/2×2-1/2×5/16 | L89*64*7.9 | 9 |
L3-1/2×2-1/2×3/8 | L89*64*9.5 | 10.7 |
L3-1/2×2-1/2×1/2 | L89*64*12.7 | 13.9 |
L3-1/2×3×1/4 | L89*76*6.4 | 8 |
L3-1/2×3×5/16 | L89*76*7.9 | 9.8 |
L3-1/2×3×3/8 | L89*76*9.5 | 11.7 |
L3-1/2×3×1/2 | L89*76*12.7 | 15.1 |
L4×3×1/4 | 102*76*6.4 | 8.6 |
L4×3×5/16 | 102*76*7.9 | 10.7 |
L4×3×3/8 | 102*76*9.5 | 12.6 |
L4×3×1/2 | 102*76*12.7 | 16.4 |
L5×3×1/4 | 127*76*6.4 | 9.8 |
L5×3×5/16 | 127*76*7.9 | 12.1 |
L5×3×3/8 | 127*76*9.5 | 14.5 |
L5×3×7/16 | 127*76*11.1 | 16.7 |
L5×3×1/2 | 127*76*12.7 | 19 |
L5×3-1/2×1/4 | L127*89*6.4 | 10.4 |
L5×3-1/2×5/16 | L127*89*7.9 | 12.9 |
L5×3-1/2×3/8 | L127*89*9.5 | 15.4 |
L5×3-1/2×1/2 | L127*89*12.7 | 20.2 |
L6×3-1/2×5/16 | 152*89*7.9 | 14.5 |
L6×3-1/2×3/8 | 152*89*9.5 | 17.3 |
L6 × 3-1/2 × 1/2 | 152*89*12.7 | 22.7 |
L6×4×5/16 | L152*102*7.9 | 15.3 |
L6×4×3/8 | L152*102*9.5 | 18.2 |
L6×4×7/16 | L152*102*11.1 | 21.2 |
L6×4×1/2 | L152*102*12.7 | 24 |
L6×4×9/16 | L152*102*14.3 | 26.8 |
L6×4×5/8 | L152*102*15.9 | 29.6 |
L7×4×3/8 | L178*102*9.5 | 20.2 |
L7×4×7/16 | L178*102*11.1 | 23.4 |
L7×4×1/2 | L178*102*12.7 | 26.5 |
L7×4×5/8 | L178*102*15.9 | 32.7 |
L7×4×3/4 | L178*102*19 | 38.8 |
L8×4×1/2 | L203*102*12.7 | 29 |
L8×4×9/16 | L203*102*14.3 | 32.4 |
L8×4×5/8 | L203*102*15.9 | 6 |
L8×4×3/4 | L203*102*19.0 | 42.5 |
L8×4×7/8 | L203*102*22.2 | 49.3 |
L8×4×1 | L203*102*25.4 | 55.4 |
L8×6×1/2 | L203*152*12.7 | 34.1 |
L8×6×9/16 | L203*152*14.3 | 38.1 |
L8×6×5/8 | L203*152*15.9 | 42.2 |
L8×6×3/4 | L203*152*19 | 50.1 |
L8×6×7/8 | L203*152*22.2 | 57.9 |
L8×6×1 | L203*152*25.4 | 65.5 |
Produzieren des ProzessesSpeicherung u. AnlieferungFirma-Profil1. Wer ist Ehren Tangshan, Hersteller oder eine Handelsfirma? Ehren Tangshan, ein erfahrenes Team seit 2004, fing an, Stahlprofile zu produzierenUnd jetzt sind wir ein Hersteller + ein Exporteur, der an den Stahlprofilen und an anderen Stahlprodukten Berufs ist 2. Was sind Ihre Hauptprodukte? Seit 1993 fing unser Familientausendstel an, Stahlwinkel zu produzieren und Kanäle, für die grossen Toleranzprodukte, sind wir Nr. 1 im lokalen MarktNicht nur können unsere eigenen Stahlprofile, aber auch andere Stahlprodukte, unterstützt durch unsere Partnertausendstel einschließlich HBIS, JINGYE GRUPPE, QIANJIN STAHL, von verformten Stahlstäben, zu galvanisierten Ringen, die von den lokalen Tausendsteln integriert sind, von uns angegeben werden 4. sind was Ihre Vorteile? Gefunden in Tangshan, hält China, der weltberühmte Stahlproduktursprung, starke Produktionskapazität, uns eindeutige Vorteile(1) Guter PreisGefunden in Tangshan China, sind wir die Produktmitte, kann guter Preis von unserem Tausendstel und von Genossenschaftstausendsteln erhalten werden(2) Beständige QualitätGefunden worden in Tangshan, produziert durch kontinuierliche Billets, ist Produktqualität im chemischen Aufbau und in den mechanischen Eigenschaften beständig(3) Vertrauliche InformationGefunden in Tangshan, China, sind wir Stahlinformationszentrale, sofortige Meldungen können an das erste mal für alle Freunde als Referenz erhalten werden Willkommen nach Ehren Tangshan, die Wahrscheinlichkeit, die unser Tausendstel und die anderen produzierenden Tausendstel besuchen kann, wartet Sie
Produkttyp
»
»
»